Alfa Romeo 156 cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup holder for Alfa Romeo 156
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Cup holders for Alfa Romeoe 159 that can hold 0.5 water bottles and paper coffee cups.
For a decent quality of the logo, print with a layer height no larger than 0.15mm. The cup holder should be printed out of ABS/ASA. The wedges should be printed out of TPU.
Because the cup holder is a large part and ABS/ASA have a tendency to warp, I decided to print it out of CF reinforced ASA because the carbon fiber helps with the warping. Otherwise it does not need the CF reiforcement.
The wedges were printed with 1 wall and 0% infill but the "circles" that hold together the wedges were printed solid. You can achieve this with modifiers in the slicer. For a consistent look and feel I printed the wedges out CF reinforced TPU. Without the CF, the wedges would have been glossy.
PETG is not enough for this. If you print them out of PETG, they will melt in the summer heat.