1 / 6
RGB Matrix Display Stand (Album Art Display with Record Cover Add-On) — zdjęcie 1
1 / 6

RGB Matrix Display Stand (Album Art Display with Record Cover Add-On)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple stand for the P3 HUB75 RGB Matrix Display and Adafruit Matrix Portal S3 with magnetic record cover add-on.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
GNU General Public License v3.0

A minimal stand for a 192mm RGB matrix display with mounts for the Adafruit Matrix Portal S3 display driver board. Mine is used as an album art display using WLED and Home Assistant to send the album art of whatever is being cast to the speakers.

A removable magnetic add-on holds a record cover so it can also be used as a now-playing display stand for a turntable when you aren't casting digital music.

Print the stand matrix display side down on the build plate. If your printer handles overhangs well you should be good without supports. Otherwise a minimal amount of tree supports takes care of the few overhangs. Make sure to separate the two pieces if you use the 3MF file.
If you do print the record cover add-on, glue two 15x2mm magnets into both the stand and the add-on (make sure you get the orientation right so they stick together rather than repel!)

Software:

Install and configure WLED on the matrix portal S3 using this install guide

This Home Assistant blueprint sends the album art using this HACS add-on

Or use the excellent Adafruit docs to create something else!

Parts:

The display and driver board are available from many sources including Aliexpress, just make sure you get a 192mmx192mm display as there are many different sizes available!

1x P3 HUB75 192mm 64x64 RGB Matrix Display [Digikey] (make sure it's 192x192mm)

1x Adafruit Matrix Portal S3 [Digikey] (the Portal M4 does not have mounting holes or ribbon cable)

4x M2.5 heat-set thread inserts

4x M2.5 screws

2x M3 screws

4x 15x2mm magnets (optional, for the removable record sleeve add-on)

Tagi