EQ telescope mount II. for OnStep goto controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOTICE: The new version now released! EQ mount II for small telescope or DSLR, desing for OnStep goto controller. How…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 1881
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v2.0
NOTICE: The new version now released!
EQ mount II for small telescope or DSLR, desing for OnStep goto controller.
How to make? See my video: https://youtu.be/Dmi01grPYCI
FreeCAD sources on Github
EQ mount used 2x My Planetary geerbox 1024:1
More info about OnStep goto controller on Howard Dutton project or OnStep News
My OnStep Controller Box for on Arduino Mega2560 board.
OnStep config.XXX.h
// Axis1 is for RA/Az #define StepsPerDegreeAxis1 12288.0 // calculated as : stepper_steps* micro_steps* gear_reduction1* (gear_reduction2/360) // NEMA17 + PLANET : 200* 16* 27/20 * 1024/360 = 12288.0 // Axis2 is for Dec/Alt #define StepsPerDegreeAxis2 12288.0 // calculated as : stepper_steps* micro_steps* gear_reduction1* (gear_reduction2/360) // NEMA17 + PLANET : 200* 16 * 27/20* 1024/360 = 12288.0 // PEC, number of steps for a complete worm rotation (in RA), StepsPerDegreeAxis1360)/gear_reduction2. Ignored on Alt/Azm mounts. #define StepsPerWormRotationAxis1 4320L // NEMA17 + PLANET : (12288360)/1024 = 4320
Another recommended link:
- My OnStep ST4 Handheld controller
- My DIY Telescope
- Wood tripod upgrade for telescope with Eyepiece plate
- My OnStep for Seben EQ3 mount
NOTE:
Use stones and cement to fill the weights.
Category: DIY