1 / 4
8 Channel Relay Din rail Mounts, holes 45mm CTC
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a remix with a hole center-to-center distance of 45mm. the original was 50mmCTC and it did not fit.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
I made a remix with a hole center-to-center distance of 45mm. the original was 50mmCTC and it did not fit.
Measure yours and print the right one.
Printed with PETG
100% infill
no supports
0.2mm layer hight
0.4mm nozzle
Printed on his side