1 / 1
4th Gen Tacoma Glove Box Gap Filler
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed my own glove box gap filler for my 4th gen tacoma
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 267
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I didn't like the fact that the glove box came with a big gap coming from the factory. I tried looking for sources anywhere that made a glove box gap filler but had a hard time. So, I designed my own.
Will fit a little bit snugger. You might need to fight it a little bit to fit in but should fit no problem and will fit seat well without any movement.
BE CATIOUS WHEN INSTALLING IT! THE THICK SIDE SHOULD FACE THE CABIN AND NOT INSIDE THE GLOVEBOX!
Print using PETG and 100% in fill.
Can use PLA but no guarantee it will last long.
Cheeers!