1 / 5
Filament Spool Roller v2 (5kg, 3kg and 1kg) — zdjęcie 1
1 / 5

Filament Spool Roller v2 (5kg, 3kg and 1kg)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament spool roller for 5kg, 3kg and 1kg spools

Ocena
5 / 5
Polubienia
18
Pobrania
163
Wydruki
1
Wyświetlenia
632
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Design Concept

The 5kg Filament Spool Roller is designed to facilitate smooth unspooling of filament during 3D printing. Its simple yet effective design aims to minimize tangling and maximize efficiency.

Use

This roller is ideal for handling larger filament spools, specifically tailored for 5kg spools, ensuring a steady feed into your 3D printer.

Printing Recommendations

Print in strong material such as PETG or ABS to withstand the weight of the spool. However, heavy walled PLA will also work. A low infill percentage is suggested to reduce weight without compromising strength. Ensure precise alignment for best results.

Assembly Instructions

The design is straightforward, typically consisting of four main parts that press together securely. Confirm all moving parts are free of excess friction before use.

Parts

2x Roller

2x Base

2x Foot

4x 608 Bearing (Standard skateboard bearing / printable bearings will work too)

Tagi