1 / 6
K1SE 120mm Fan Bottom Pan Upgrade With Adjustable Feet — zdjęcie 1
1 / 6

K1SE 120mm Fan Bottom Pan Upgrade With Adjustable Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

designed to mount 120mm fans on the bottom of a k1SE. Mounted and tested Fully functional with Printers that have been…

Ocena
0 / 5
Polubienia
6
Pobrania
7
Wydruki
0
Wyświetlenia
79
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

designed to mount 120mm fans on the bottom of a k1SE. Mounted and tested Fully functional with Printers that have been well dialed in or just basic set up. making this kept my mcu under 50c even with 100c bed temps on long prints. i do use both fan mounts as intakes as it does have side holes for exhaust. it doesn't use stock feet unless modified by shaving the step off the rubber feet and you do need longer m3 screws and or nylocks to lock in the feet, i didn't want nylocks but is slotted for them. the back fan piece is slotted for the grounding straps and also additionally slotted for wires to come out the back for any additional accessories.

Category: 3D Printer Accessories

Tagi