QIDI Q2 waste bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a waste bin for the Q2 that could be fixed in place and easy to pick and put back.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 06/02/2026:
When I added the HSW cover on the side where the spool holder is placed, it became impossible to use the spool holder, as it won't fit. So I made a variant of the Q2 bin adapter to have the spool holder interface closer to the edge. Check Q2 Bin Adapter for HSW.STEP or .STL.
Just printed a proto in ASA and it fits quite well. Added some photos of the new adapter and spool holder installed.
I wanted a waste bin for the Q2 that could be fixed in place and easy to pick and put back.
When I got the printer, one of my first prints was a very big L-shaped bin that was great, but often moved away from the printer letting the filament waste all over the floor. I searched for something more suitable for my needs but could not find anything that satisfied me.
So, I made this one.
It uses the fixation for the spool holder (which I am currently not using) to support the an adapter that holds the bin in place. I find it quite simple and easy to use.
I also designed a bin but the first try was a little too big, so I made also a smaller version.
Further I included in the adapter some features to enable the spool holder to be used (although at a higher location).
I hope someone else find it useful.
I printed the adapter in ASA and the Bin in PETG, both using supports and 0.2mm layer height.