Easy-to Print Customizable Promotion Flyer Stand (DIN LONG format)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy-to Print Customizable Promotion Flyer Stand (DIN LONG format)
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 122
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple and easy to print stand for about 50 flyers of DIN LONG format.
The inlay for the flyers is slightly bigger than the standard DIN LONG format and can keep flyers with a with of up to 10,6cm. This total height should not be more than 22cm to avoid hanging over to the back.
The little security belt can be used to avoid that the flyers may fall to the front. It holds tight and can be adjusted in height to avoid masking important information of your flyer so you can arranged it new every time you change the flyer layout. It is recommended to print this part in PETG.
The files are BLANK so that you can add your OWN text.
Looks best when printed in multicolor design. I posted some pics of flyer stands we already made. Most of them are in German language but they look good anyway.
Please post YOUR designs, thanks.
Enjoy & have fun!
Material: Foot/Inlay (PLA), Security Belt (PETG)
Layerheight: 0.24mm
Infill: 15%