Boat Flush Mount Rod/Pedestal Holder

OD.50mm X ID.43mm X L.250mm

I designed and printed these flush mount rod holders specifically for my boat using ASA-CF. I wanted something stronger and more durable than the cheap plastic ones you typically find, especially something that could handle sun exposure, heat, and constant use out on the water.

The design focuses on strength where it matters most. The tube and base are blended with a fillet to reduce stress and prevent cracking, and the overall wall thickness was chosen to balance strength and print time. ASA-CF was the obvious choice for this because it holds up well outdoors, resists UV damage, and has a nice rigid feel thanks to the carbon fiber.

Other filaments that could work for something like this would be PETG or PET-CF for a slightly easier print while still being water resistant, or even PA6-CF/PA6-GF if you’re looking for maximum strength and don’t mind the extra prep and drying. ASA (non-CF) is also a solid option if you want the same UV resistance without the added stiffness from carbon fiber.

They were printed on a Bambu Lab P2S with an enclosed chamber to keep temperatures stable and prevent warping during a long print. The final result is a clean, solid part with a textured finish that actually looks like something you’d buy rather than something 3D printed.

Overall, these came out exactly how I wanted — strong, functional, and built to last on the boat.