1 / 6
Heltec  REmixed case of Meshtastic Heltec V4 Enclosure - Long for 18650/21700 — zdjęcie 1
1 / 6

Heltec REmixed case of Meshtastic Heltec V4 Enclosure - Long for 18650/21700

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a rough and ready remix of the brilliant Meshtastic Heltec V3 Enclosure -

Ocena
5 / 5
Polubienia
14
Pobrania
115
Wydruki
2
Wyświetlenia
1262
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I printed mine at .16  with a .4 nozzle, petg with supports. 
Increased the length a little, added space for the battery cable plug, increased the internal clearance to fit a 18650 battery and the GPS module.(if you remove the GPS modual you can fit a 21700 in a slim form holder.)
a little double-sided tape for the battery holder( find the smallest you can) and the GPS module. 

It is ROUGH, i have zero CAD skills, so all done in a slicer but it seems to fit just fine, and works great. 

Added holes for M3 heat set inserts and use M3 5mm screws.


Have ran the GPS for 48 hours, and didn't seem to cause any issues with the battery. 

Tagi