Frosthaven: Shrike Fiend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's my take on the Frosthaven monster, the Shrike Fiend! This guy's slendermanish, but with a flock of shrikes…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's my take on the Frosthaven monster, the Shrike Fiend! This guy's slendermanish, but with a flock of shrikes flying into and forming its body. I guess. There's certainly some interpretation going on in that statement! Regardless, that's how I chose to make the model ;)
I worked really hard to reduce the support requirements for this model. As you can see in the screenshot that I attached, it still needs some supports, but the flock is pretty well self supporting. That one wing on the right side needs support to ensure that the feather tips print, but most importantly, you don't need to fill up the flock with a bunch of nigh-impossible-to-remove support material!
As always, the .blend file and any pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!
Category: Toy & Game Accessories