Frosthaven Flaming Bladespinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's my take on the Flaming Bladespinner monster from Frosthaven! I printed it in two halves, so that no support…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 226
- Wydruki
- 3
- Wyświetlenia
- 761
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's my take on the Flaming Bladespinner monster from Frosthaven! I printed it in two halves, so that no support would be required. I put a key and slot in that version to help line it up, but depending on your first layer squish you may need to trim the slot a little bit to get it together.
As always, the .blend file and any pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!
Category: Toy & Game Accessories