Frosthaven Lurker Clawcrusher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's my proxy for the Frosthaven monster, the Lurker Clawcrusher! This guy's on the big side, so you may want to…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 193
- Wydruki
- 2
- Wyświetlenia
- 583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's my proxy for the Frosthaven monster, the Lurker Clawcrusher! This guy's on the big side, so you may want to scale him down to 80% or so so that he doesn't overhang the base so much, but I decided to make him bigger so that the smaller features would be more easily printed on my FDM printer. As you can see in my screenshot, this model needs a lot of supports to print successfully.
As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!
Edit: I've made a v2 of this model and have included it here. This version is a little more svelte and so should fit on a 25mm base better. It still overhangs, just not nearly as much as the original.