1 / 1
Epson Perfection V300 (supports V100, V200, V330, V370) 35mm Negative Holder — zdjęcie 1

Epson Perfection V300 (supports V100, V200, V330, V370) 35mm Negative Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement negative holder modelled using a V300 Perfection scanner. Made to be 3D printable, with minimal support.

Ocena
0 / 5
Polubienia
3
Pobrania
73
Wydruki
1
Wyświetlenia
240
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

A film holder for an Epson Perfection V300 scanner.

Needs minimal supports. Settings used to print were grid/snug to support just the overhang, 5% grid infill, and a .16mm layer height.

Holds a 6-photo strip, and has a small catch mechanism to simplify loading.

The aperture is slightly larger than the original holder, to capture more of the sprocket area and thus allow for better white balance data collection when converting negatives.

In case of issues, leave a comment.