1 / 2
RatRig V-Core 4 Mandala Rose Works Z arms nozzel brush — zdjęcie 1
1 / 2

RatRig V-Core 4 Mandala Rose Works Z arms nozzel brush

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

intended to be used with MandalaRoseWorks bed arms where the left is still using the second spacer.

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This mod is for the MRW Z arms I included the step files if you want to edit anything.

I really liked the model by @Kuroi_3472520. I just like the Qidi plus 4 silicone brushes better. Also the original left side brush was about 7mm to low so I raised it and and used the qidi brush instaed of the Bambu ones.

Edit:  After messaging with Kuroi I relized that I did not remove the second spacer on the left arm when installing his version of the brush holder. My mistake for not reading all the instructions. So my model will work if you still have the second spacer on the left arm.

You can buy the brushes on Amazon or Ali Express.

Amazon:  https://www.amazon.com/dp/B0FPB28N62?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Ali Express: https://s.click.aliexpress.com/e/_c429i1aL

I also used the clean nozzle macro from @NoizieWorks_255710. I attached the macro in the downloads folder. If you go to his model for his wiper brush there is a video on how to set up the macro. The macro only cleans the left tool head of the IDEX system but thats all you really need. The right brush is just for aesthetic balance.  I liked his model better but because I have an IDEX system my right tool head would colide the the rear motor before the left tool head gets to the brush.