TSX14 // Lightweight Table : No Supports, No Hardware
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra Light weight (1062 gram) - Full Scale Coffee Table Presented by SMACKMAX
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Commercial Use - No Derivative
TSX14 is A lightweight structural table system designed to minimize material while maintaining strength and stability.
Built around a triangular geometry, the structure carries load through shape instead of mass, resulting in an efficient, clean, and fully hardware-free assembly.
Dimensions: X 360 mm, Y 360 mm, Z (Height) 500 mm Extra-Light-Weight: Needed PLA: 1.062 grams (2 walls, 5% gyroid)
Print volume needed: X 220 mm, Y 220 mm, Z 250 mm
Assembly:_ Make 2 halves. Form the triangle by connecting the pins, insert the feet into the triangle, and complete one half of the table. Repeat for the second half. Insert the plugs, align the top and bottom halves, and snap them together. The top plates require some encouragement to snap into place — this is intentional, so everything locks together tightly._
I chased a balance between lightweight and strong structure, while keeping it free of waste and hardware. Hope you enjoy!
Interested to see more of my projects?