1 / 7
100mm Fume Extractor & Purge Chute Hybrid — zdjęcie 1
1 / 7

100mm Fume Extractor & Purge Chute Hybrid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Safe ABS Printing for the Anicubic Kobra S1 – Zero Fumes, Smart Waste Management.

Ocena
0 / 5
Polubienia
6
Pobrania
76
Wydruki
0
Wyświetlenia
457
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This hybrid upgrade for the Anycubic Kobra S1 Combo is a must-have for printing technical filaments like ABS or ASA. It extracts toxic fumes (VOCs) directly at the source while keeping the printer's purge functionality fully operational.

Key Features:

Dual-Purpose Design: Integrated 100mm exhaust flange and a dedicated internal channel to guide filament 'poop' to a waste bin without obstructing airflow.

Hybrid Mounting System: Rock-solid stability by reusing the 2 original housing screws, combined with 12 powerful magnets for a flush, airtight seal.

Universal Connection: Designed for standard 100mm (4-inch) ventilation ducts.

Required Hardware:

Magnets: 12 pieces (5x2mm) – https://amzn.eu/d/0e5edAyn

Ducting: 100mm flexible hose – https://amzn.eu/d/0gkktxSH

Screws: No extra hardware needed; reuse the two stock screws located next to the purge exit on your Kobra S1.

i've upgraded an extra bigger wastebox

Tagi