3D-Scan | Ubiquiti E7 Access Point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A full 3D scan of the Ubiquiti UniFi E7 access point, taken from a real unit.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a full 3D scan of the Ubiquiti UniFi E7 access point. I scanned my own unit so I'd have an exact reference for building things around it: mounts, brackets, enclosures, cable covers.
Because it's pulled from the real device, the geometry is all there. The recessed screw holes, the port cutouts on the back, the actual curve of the housing. Model a part against this and it tends to fit on the first print instead of the third.
One thing to know: this is a dense scan mesh, not a print-ready model. At roughly 3.2 million triangles it's built to drop into CAD as a reference body, not to slice as-is. Pull it into Fusion, Blender, or whatever you use, line your part up to it, and design from there.
If you make something off it, post a Make. Always good to see what people come up with.
Mesh: ~3.2M triangles
File size: ~128 MB