Watch Box with Inlay Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With optional top pattern for multi-material machines. No supports or extra hardware needed. For 6 or 8 watches.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 436
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
With optional inlay style top. No supports needed. Sprung hinge pin design needs no extra hardware. This may require around 550-650 grams of material depending on your print settings. XYZ size is 220 x 168 x 85 mm
File Variants:
Box and Inserts: Option for 6 or 8 watches. Choose the 6 watch version if you have bigger watches over 48mm wide.
Lid: Files for solid color or multi-material.
Pins: 2 different tolerances depending on your printer's accuracy and material choice.
Tips:
Print the 2 springs independently, as they might loose bed adhesion and damage other parts. See that the g-code shows a somewhat continuous initial line. Adjust your extrusion width if your slicer tries to split it up into too many disjointed sections. Align the seam towards the back of your print bed.
When assigning materials on the lid, use the file list instead of your slicer visualization - sort by name alphabetically. The "Dark", "Light", and "Mid" labels are mere suggestions, you can swap the 3 categories and still achieve the 3D illusion.
Print the pins vertically in 100% infill.
Pins can be pushed out using a tool like a hex key.
Update 10/12/26: Multimaterial lid was reuploaded. Original was tilted and didn't import flat into the slicer.