1 / 4
21700 wall bracket to Suit 8 Channel 18650 tester
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for 21700 board
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a bracket to install my 21700 test jig on my wall. You can wire up to the terminals on the outside of the 8 channel tester.
You can only test either 18650 or 21700 per slot not both at the same time.
I feel it is a neater and more secure solution for testing both sizes of batteries
Designed voids to allow terminals to have space so the board can sit flat. Screw bracket to wall then affix with double sided tape.