Gloomhaven Monster: Inox Shaman
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've made an Inox Shaman for Gloomhaven (http://www.cephalofair.com/wp-content/uploads/2015/09/Inox-Shaman.jpg)! I…
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 293
- Wydruki
- 3
- Wyświetlenia
- 838
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've made an Inox Shaman for Gloomhaven (http://www.cephalofair.com/wp-content/uploads/2015/09/Inox-Shaman.jpg)! I initially modeled it in a pretty neutral pose, like in the official artwork... but without all of the cool details of the actual artwork, it looked a little boring. So, I changed the pose around to make him a bit more dynamic, and that's the one that's going to find its way to my table (well, except for the one who's just standing there... since that print is usable, although not great, it might eventually come out). This guy was a fairly challenging print, but I made some changes in the more dynamic pose (#2) to try and make him easier to print. I printed mine with a .25 mm nozzle and .05 mm layers, I don't know how well it'll work on other equipment!
The .blend file for this guy is available to my patrons at https://www.patreon.com/posts/22212228.
Category: Toy & Game Accessories