Volvo P1 (S40, V50, C30, C70) pre-facelift headlight adjustment screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The leveling screws for P1 Volvos are made of plastic, easy to strip out, and not sold separately.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I had to replace the leveling adjustment screws in my '08 C30 after the previous owner completely stripped them out. I haven't tested if these fit on other headlights in the P1 lineup, but it should be the same. Let me know!
Unfortunately you do have to disassemble the headlight to install these; they have to be inserted from inside the assembly. But if you own a P1 Volvo you'll probably have to take the headlights apart to replace the crappy wiring anyway. I just love the design of these headlights!
But I digress. The main difference between these and the OE part is that I didn't include the crown gear, which was deliberate because those always strip out anyway. Apparently the gears are intended for an indicator and aren't even supposed to be used to adjust the headlights? Dunno.
Either way, this should be as strong as the originals if printed in a decent filament. Preferably the strongest and highest temp you've got! I used PCTG, will update if it winds up failing.
(note that I had to make a design tweak since I took the pictures)