Gloomhaven Monster: Deep Terror
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a Deep Terror from Gloomhaven (http://www.cephalofair.com/wp-content/uploads/2015/09/Deep-Terror.jpg). This guy…
- Ocena
- 4 / 5
- Polubienia
- 26
- Pobrania
- 283
- Wydruki
- 3
- Wyświetlenia
- 831
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a Deep Terror from Gloomhaven (http://www.cephalofair.com/wp-content/uploads/2015/09/Deep-Terror.jpg). This guy needs a bit of support, but less than you'd think. I put support under the "arch" formed by the front two tentacles and a tree going up to support the tip of the back tentacle. Other than that, the model is pretty self-supporting. At least, I tried to make it so! I printed it with .05 mm layers and a .25 mm nozzle; I'm not sure how it'll work with other settings.
If you're interested, wrote a post about how I made this model on my blog, at http://objectforge.blogspot.com/2018/08/new-thing-deep-terror-for-gloomhaven.html
Category: Toy & Game Accessories