Stepped square measurement calibration stack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Calibration stack: five 10mm tiers (75→35mm wide), height marks 10–50mm, width arrows, embossed digits 1–6mm tall.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 66
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Public Domain
Physical reference print for rulers, layer height, and small embossed text. Five hollow or solid stepped square levels, each 10 mm tall, stacked largest to smallest: 75, 65, 55, 45, and 35 mm on a side.
Side faces: running cumulative height labels from the base — 10, 20, 30, 40, and 50 mm — one value per tier so you can read total stack height at a glance.
Top surface: six embossed characters (1 2 3 4 5 6) where digit “1” is 1 mm tall, “2” is 2 mm, through “6” is 6 mm, so you can judge minimum readable / printable character height for your printer and filament.
Plan view (each tier): dimension graphics with arrows across the square showing that level’s edge length (75 mm on the bottom tier, stepping down to 35 mm on the top).
Handy for checking dimensional accuracy, Z calibration, embossing depth, and font size on one compact desk model.