Chessex Battlemat Molle Retention System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder/cup and ring system for transporting tube-like objects using MOLLE/PALS webbing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Today in "solving niche problems that may or may not actually exist," I recently got a Chessex Battlemat and I wanted a way to transport it in my D&D bag, which happens to be one of those "tactical" bags (SOG Ninja) with the MOLLE/PALS webbing. Since one side has webbing and nothing else, I thought I could rig up a way to use that space to transport the rolled up mat. (Technically this could be used for most any tube shaped thing.)
The system has three elements, a cup/holder end, a ring, and an optional end cap. (End cap not pictured.) Both have a pair of legs with a small ledge to hopefully keep them from sliding out too easily. These are designed to be used with 1" webbing, but I expect it could be scaled up or down as needed. Other dimensions are below.
Specs (US Imperial, I apologize in advance)
Leg length: 1" plus a 1/16" retention lip
Ring depth: 1 1/2"
Cup/Cap depth: 2"
Inner Diameter: 1 3/4"
Wall thickness: 1/16"
Width: 2 1/4"
Modeled in Tinkercad
Print as pictured
Prusa Mk3S+
Inland PLA
PrusaSlicer - 0.20 Quality preset
Supports are not necessary
Printed with a brim - may not be necessary, but I haven't tested that