BMW Style Universal Sunroof Wind Deflector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is used to help diffuse the air flowing over your car's sunroof hole making it less loud and uncomfortable.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 1141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
It's based off of the BWM Genuine Slipstream Deflector, mostly because it can be printed off in several smaller parts but still work as well as the long oval designs.
I'd suggest spraying a few layers of clear coat or paint since this is a print that will be in the elements.
My car is a 2007 Toyota Camry LE With a total sunroof width of 87cm so that gives you an idea on spacing.
I attached them with some JB weld and it holds great.
UPDATE: I originally had it set up for PETG, but after this summer heat I've changed the file for ABS. They ended up warping on my roof peeling up and shrinking badly. Oklahoma heat causes too much problems for PETG. ABS should be fine as it holds up better.