Pegasus Winged
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is Pegasus with wings. Printed with 100% infill to make it solid. I have increased the base height to compensate for the weight on the model. Settings for supports are Normal, Grid, 12, Build plate only, Remove small overhangs Checked. This requires that your slicing profile is already dialed in for stringing etc... I printed with SUNLU Transparent PLA and my profile is for a .6 nozzle. This should print well on .4 as well but will take considerably longer. If you do print it please post a make. I am interested to see what settings you use and filament and any feedback to create this to be a nice as it can be. The photo is a print before I increased the base because it bends with less than 3 layer base under the model weight. I will post another picture when the new print is done. The current file is the larger base already.