mk4 VW Exhaust Heat Shield Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the rear heat shield under the gas tank. Replacements are metal with solid outer rim, these require no bending.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
All the clips holding the heatshield under the gas tank were rotten away, so I have no idea what they looked like. These seems to work, but obviously might be subjected to high heat, so no guarantees on longevity. Print with your highest temperature filament... and print some spares... and maybe throw some aluminum tape over them to shield your heatshield clips from the heat. (yo dawg, I heard you like heat shields...)
All the ones I found online are solid circles, with no divots for the 3 tabs on the heatshield. They were probably meant to be installed with tabs straight out and then bent over the edge, but I didn't want to risk bending this old metal back and forth, so I made them twist-lock.