Potentiometer clamp for base mount / with top hat DIN rail mounting bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a clamp I designed for two potentiometer I need to put inside a control box.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 273
- Wydruki
- 0
- Wyświetlenia
- 1356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a clamp I designed for two potentiometer I need to put inside a control box.
The clamp snaps on Potentiometer so it is not really necessary to put a nut on it for fixing.
I used my Top Hat Rail / Cap Rail mount base plate to glue the clamps on.
Some more info about the potentiometer I made this clamp for:
Shaft diameter 6 mm
Base height 7,1 mm
Base diameter 16 mm
Update: I made a combination where two of this potentiometer clamps were directly attached to my top hat rail mounting bracket.
Update: Made a variant with 5mm hole for wall mount.
Print instructions
Category: Electronics