1/2" Hex Bore Adapter for Actobotics D-Shaft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part was designed to interface common FTC shafts to a 1/2" hex bore with soft intake wheels in mind, such as…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This part was designed to interface common FTC shafts to a 1/2" hex bore with soft intake wheels in mind, such as AndyMark compliant wheels and Vex Flex Wheels (with VersaHub).
As always, 3D printed parts are relatively soft, so this design will not work well for high torque applications. The shaft hole will easily cam out.
The OpenSCAD source script is included for your modifications. The shaft size can be easily changed for 1/4" (6.35 mm) D-Shaft (Actobotics), 6 mm D-Shaft (Gobilda), or 5 mm Hex-Shaft (Rev), and/or tailored for sizing with your printer and slicer.
Category: Robotics