Miter box - saw guide - angle cutting jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig for saw guiding when cutting angles.
- Ocena
- 5 / 5
- Polubienia
- 302
- Pobrania
- 673
- Wydruki
- 1
- Wyświetlenia
- 2374
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Open Community License v1
Saw guide for accurate angle cutting (FreeCAD file attached). I printed with 0.6 mm nozzle, 4 walls and 50% Adaptive Cubic infill which resulted in relatively stiff walls when printing with PLA. Also I added a brim to reduce warping.
This option is better then shop one because you can easily adjust spacing for saw guide and height of the guiding walls depending on your saw.
When using/cutting wood I would suggest to support the stick/boards on the other side with a pad/spacer which is the same thickness as this base.
Thanks to https://www.printables.com/@ZbynekCh for aspiration with and his https://www.printables.com/model/87608-angle-cutting-jig-kosorez.