Toyota Headlight Bucket Thread Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this to resolve the issue of stripped out holes on my AW11 MR2 headlight bucket fastener holes. These utilize and require M4x6mm brass heat-set inserts to make a custom fastener that easy to install and lasts. Simply print the part, install the inserts, and install. You may need to drill the original threads out using a 5/32" (4mm) drill bit These should also work for other older Toyota vehicles and probably many other JDM cars from the 80s! Let me know what you think! Support me by watching a short video posted below! Thanks!
I recommend using a high-temp filament like a CF PETG. I used CF PC because that's what I had.
Also Required: M4x12mm Screws (Whatever kind you want! I used flat head Allen screws!)
Support me by watching this video: