NetGear GS308E 10" Mini Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a print that will fit diagonally on a Creality K1c. I printed it in PETGThis design will mount an 8 port…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Here is a print that will fit diagonally on a Creality K1c.
I printed it in PETG
This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's.
There are ventilation holes which also aid in reducing the amount of filament needed. There are 2 indexing pins that stick upwards into the mounting slots on the bottom of the switch. This secures the switch into place without any fasteners needed.
Switch Dimensions: 158.5mm wide 101.5mm deep 26.5mm tall
Print Settings
Printer Brand:
Creality
Printer:
K1C
Rafts:
No
Supports:
No
Infill:
35%
Notes:
It took awhile to get the settings tuned in. I ended up printing at 265 and that finally fixed extrusion issues.
Category: Computer