Lello Musso Pola 5030 Shaft Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects the center shaft bearing when the dasher is removed and scooping out ice cream or cleaning the bowl.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For the Lello Musso Pola 5030 ice cream maker. The center shaft bearing is exposed whenever the dasher is off so it is easy to get ice cream or water on the bearing. It is supposed to be kept clean and, apparently, ice cream and/or water can seep down the bearing and possibly cause troubles in the future.
Put this cap on whenever you take the dasher off. Then put the screw cap back on. Now the bearing will stay clean when removing finished ice cream from the bowl, or when cleaning the bowl.
Prints easily without supports. Use food-safe filament. I used ABS.
I printed with a 0.8mm nozzle, since that's what I currently had on my printer. I used 2 perimeters and 10% Gyroid infill. With a 0.4mm nozzle, I'd use 4 perimeters.