Ultimate Guard Boulder 100+ Card Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Card holder for Magic the Gathering and (maybe) other card games. Recreated with FreeCAD.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
WHY I MADE THIS:
I originally made this for a friend who wanted me to clone and print an Ultimate Guard Boulder 100+ Card Box for Magic the Gathering. I eventually posted it up to Printables.com because why not?
RECOMMENDED WAY TO PRINT:
I Recommend to print without feet like this if you want a nice print:
If you want feet, I recommend turning the bottom one by 203 degrees and printing with supports like this:
or you can just print how you want to print
PRINT SETTINGS:
Material: PLA
Infill: 15%
Rafts: None
Brim: Recommended
Supports: Recommended with Feet
Layer Height: 0.20mm
EDIT v1.1:
made box hold together better.