1 / 5
Trichter für 5 Liter Kanister zum aufschrauben; Funnel for 5-liter canisters, screw-on type; M39,5 x 4 — zdjęcie 1
1 / 5

Trichter für 5 Liter Kanister zum aufschrauben; Funnel for 5-liter canisters, screw-on type; M39,5 x 4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Trichter für 5 Liter Kanister zum aufschrauben; Funnel for 5-liter canisters, screw-on type; M39,5 x 4

Ocena
5 / 5
Polubienia
122
Pobrania
546
Wydruki
2
Wyświetlenia
1671
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4.
Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister.
Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken;
empfehle ebenso vorher nur den Gewindeteil zu drucken und auf Paßgenauigkeit zu testen - falls er nicht passen sollte spart man eine Menge Zeit und Material.

Update: Modell mit der Beschriftung der Gewindedimension hinzugefügt.

Update: zwei weitere Trichter mit größeren Einfüllöffnungen, Durchmesser 160 mm und Durchmesser 200 mm hinzugefügt.
......................
Screw-on funnel for 5-liter jerrycans. Thread size M39,5 x 4
There are several of these funnels available, but the thread on none of them fit my jerrycan.
I recommend printing the thread with the lowest possible layer height;
I also recommend printing only the threaded part beforehand and testing for fit – if it doesn't fit, you save a lot of time and material.

Update: Model with thread dimension labels added.

Update: Two more funnels with larger filling openings, 160 mm and 200 mm in diameter, have been added.

Tagi