Water Bottle Holder for Small Pets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This holder was designed based on a small 100 ml bottle with a diameter of 45 mm. The model is available in two versions:
With rim: Provides a secure stop to prevent the bottle from slipping through.
Without rim: Allows for smooth height adjustment as needed.
The holder is designed to fit a 10 mm hole using an M10x1.5 thread. The thread has increased tolerance to ensure smooth assembly even with standard 3D printing settings.
Printing Tips:
Material: I recommend using PETG for its strength and flexibility.
Supports: Supports are required under the thread for a clean print.
Scaling: The model can be scaled in your slicer to fit different bottle diameters. However, please keep in mind that scaling will also change the thread diameter and the required mounting hole size.
