Pen Plotter mod for Mega Zero 3d printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Before I owned a Prusa Mini, I had a Mega Zero that stopped working. This mount converted it into a pen plotter.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 657
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Hello there. I made a mod for my broken Mega Zero 3d printer. This mod will give your old Mega Zero (v1) printer a new life. This will convert one into a Pen Plotter. I removed the hot-end, fan, and other things that generated heat and turned off those settings in cura. I screwed in the mount where the extruder used to be with the original screws and used a zip-tie to stabilize the pen to keep it from wobbling. Use 2 m1.7*5 screws to hold a pen or another drawing/writing utensil in place. Clips and tape should help hold the paper in place. I can share my cura settings if you want.
I followed some of the instructions from this video by: Hackbatch, but changed some settings for my own printer. Do this mod at your own risk.