Universal Centering Cone Axles and Nuts for Bambu Lab Filament Spool Switcher & Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A combination of the spool axles and nuts from the original model by @MiklosKiszely_486882 with the universal centering cones from STORM DESIGN (@Damian27). This saves a couple of parts, avoids centering discs for different spools and allows to use the universal centering cones with even wider spools (70mm).
Everything can be printed without support. If you print without support, take care to set random seams for the axles because the overhang of the cone is quite steep and with an aligned seam the surface becomes very rough at the seam. With random seam it also becomes somewhat rough but evenly distributed over the perimeter.
You can see my printing orientation in the pictures.