Bread Lame (UFO/ DISC STYLE BLADE HOLDER)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a UFO style bread lame and sheath designed to hold a standard double edged razor blade.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Notes:
All printed parts were printed in PLA with no supports and 15% infill.
I designed parts to be printed with the textured face on the build plate and threaded sides facing upward
Components:
1 Printed part "MALE_FINAL".
1 Printed part "FEMALE_FINAL".
1 Printed part "SHEATH".
1 double edged razor blade ( Example )
Assembly:
Print all Components
Place razor blade in slot on printed male half so that the "T" aligns with the cutout in the razor blade.
Thread the printed female half onto the male half until blade is held snug. (be careful not to cut yourself)
Assembled bread lame can be stored blade 1st in the sheath as shown.
Commercial License Available This model is for personal use only. If you want to sell physical prints, you can purchase a Commercial License. Contact me at: your email / Etsy shop / Gumroad link / PayPal link.