Easythreed K2 spool holder fillament 1kg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder for 1kg fillament on Easythreed K2 and K1 series. Possibly it should also fit K9 and K10.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Open Community License v1
This is Easythreed K2 and K1 spool holder for 1kg filament. It is created since every other available spool didn't meet my requirements. It is created so it can hold 1kg filament. Also it prevents tangling and unnesecary bending of filament, especially when you print tall models.
It is built so it fits with original screws. If you have ~5mm longer screws even better.
Parts are printed on K2 printer with original bed.
Recommended print settings:
-Temperature 200°C.
-Initial layer speed 30mm/s
-Other layer speed 40mm/s
-Walls 3layers of 0.8mm thickness.
-Infill 20-30%
-Cooling 95%
-No heatbed
-Material PLA.
On bar I used 2 bearings 625-Z (dim. 16x5x5mm).
I used super glue to connect bases and pillars, also you can use PLA gun glue.
PLEASE LIKE MODEL AND FOLLOW ME.