Ninja Luxe spacer for IMS basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for Ninja Luxe espresso machine that is required in order to use aftermarket IMS basket.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is a replacement for stock spacer that sits between the basket and portafilter. It is designed specifically for IMS Convex basket, which has a sharp "lip" which cuts into flat spacers. In order to accommodate for this, its raised and tapered on top, so that the basket has as much contact area as possible. This also makes the model more resilient. I made it for myself, to be used with bottomless portafiler. It took many iterations to get the dimensions right, and it might not fit yours perfectly as there are manufacturing variations. Therefore I added F3D source, so you can edit it to suit your needs.
Main features
Fits Convex IMS basket (might fit others with the same lip design).
Works with stock funnel.
Prints without supports.
Space for 5x4mm neodymium magnet so your machine correctly recognises the basket (applicable for doubles).
Print recommendation
Printed part has to survive temperatures close to 100C, high pressure and be food safe (does not come in direct contact, but I would not risk having toxic plastic close to food). I used PETG variant that has heat deflection of 100C, sold under different names (such as PETG HT100).
You can also try standard PETG, your results might vary - as this part is designed to sit "under" the lip, it might survive for some time.