1 / 2
Optimized Toyota GR86 / Subaru BRZ Door 6.5" ish Speaker Adapter — zdjęcie 1
1 / 2

Optimized Toyota GR86 / Subaru BRZ Door 6.5" ish Speaker Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Door speaker adapter for several Toyota and Subaru models. GR86 and BRZ / FRS / GT86

Ocena
5 / 5
Polubienia
11
Pobrania
107
Wydruki
1
Wyświetlenia
630
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

This worked fine with the “slim mount” 6.5" polk db651s I used to replace the stock door speakers. That and a metra harness they work great. 

6.5" speakers are all different and they will just do whatever mounting size they choose, print the first two layers and see if it works for you. Keep in mind this uses nuts at the back for the screws to go through the top. 

Print out of abs or similar, I forgot to take photos of it installed but it works fine, just use foam and fabric tape like any other audio work.

You can also choose to add a negative cylinder sideways in your slicer to make room for speaker wire if you cannot run it through the door. 

Share your models :)

Tagi