Tablet Hand Strap (clamp)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hand strap for easier holding your tablet. I made for my boox, but everything can be adjustable.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Tablet Hand Strap
This is a fairly simple model. I made it for my book Leaf2 after my hand got tired from a long reading session. If your device is different, you may need to adjust some dimensions (original CAD model is included and has a VarSet for convenience).
Making
You’ll need some elastic band (i don't know the name exactly, picture include), 25 mm wide (1 inch); about 50 cm is enough.
Print two of these, wrap them around opposite corners, and you’re done.
These "clamps" hold the elastic band in place, so no sewing or glue is needed — you can remove or adjust the tension as you like.
Printing
Recommend print settings:
2 walls
no infill (this is small)
earmouse brim (to keep the print in place)
Happy printing, and reading!