Dremel 3d45 filament cover with feedthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The cover allows using non dremel filament easily without letting the cover open or drilling any holes
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 221
- Wydruki
- 1
- Wyświetlenia
- 1270
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Back in 2018 this was my very first design online. It's the first someone else downloaded, printed and posted a make of. It really felt good and it still does :)
https://www.thingiverse.com/thing:3055819
BOM
to print:
1x Deckel_mit_Durchfuehrung.stl
1x Deckel.stl
2x Schnapper.stl (use nylon or similar slightly flex material)
1x Griff.stl
1x PTFE coupler https://www.thingiverse.com/thing:2538229
to buy:
4x M4 nut
4x M4x12mm hex socket screw
4x M3 nut
4x M3x8mm hex socket screw
1x 450mm PTFE tube
I use this very cool spool holder/container for my setup: https://www.thingiverse.com/thing:2119644
(which is also available for small size printers like the dremel 3D45)
see the pictures
Print Settings
Printer Brand:
Dremel Digilab
Printer:
3D45
Rafts:
Yes
Supports:
Yes
Resolution:
0.3
Infill:
15%
Notes:
you'll need a raft for the nylon snapper and support for the handle
Category: 3D Printers