Coat hanger rack on a cubboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two 3D printed sliding attaching thingies. You can screw them to the cubboard roof. You can push and pull the rod in…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Two 3D printed sliding attaching thingies. You can screw them to the cubboard roof. You can push and pull the rod in and out. Can be thus hidden a bit from the view.
White pipe outer diameter is 22.3mm.
The holders for the pipe are designed so that they will give up the pipe of some kid or animal jumps on to the pipe. Cupboard should not thus break (no guarantee though :D).
Pretty specific so might not be very useful for you directly but ... hey inspiration!
Printed on 0.35 layer, white PLA
Post-Printing
Tuning
Some fine tuning to the holes to fit the screws which I happened to have laying around.
Category: Bathroom