GT2 6mm belt tension with strain gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GT2 6mm belt tension with strain gauge
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 587
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The idea for this tool was inspired by this video. Unfortunately, the author deleted the project, so I created my own version. It's basically the same as the original project, but I added a calibration option so the display numbers match the kgf.
Build of Materials:
Spoon scale - 1pcs
Bearing 693ZZ (3x8x4mm) - 1pcs
Spring 0.5x5x35mm - 2pcs
Shaft (rivet) 2x34mm - 2pcs
Bushing 6.5x4.9x10.5mm - 2pcs
Screw M3x10mm - 1pcs
Screw M3x5mm - 6pcs
Screw M3x25mm - 1pcs
4-wire cable - 250mm
Assembling the device is simple and shouldn't cause any problems. A few tips:
The bushings and bearing should rotate to avoid resistance
The guides must be lubricated
When calibrating, ensure the belt doesn't twist
Information on belt tension can be found, for example here.