Steam punk HP Otto AWD link drive like locomotive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AWD for HP Otto. Steers like Tracked version. the AWD is using link drives instead of gearing.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
The drive is designed for HP_Bottom_R2! For preview check:
Print in 0.2 layer. No supports. Please orient all parts flat. I build the robot with with SG90 servos. I figured out any of the provided levers is not fitting the drive wheels but the single ended one can befitted into the drive wheel. I created simple Arduino sketch for ESP32 to control the servos over BLE Controller apk so you can test the wheels. The wheels are working surprisingly well with the Otto robot.
Print list:
12x Washer
6x Small_wheel
4x Big_wheel
4x Outer_pin
8x Inner_pin
4x Link
2x ServoWheel
2x FrontWheelBearing
2x FrontAxle