DJI Osmo 6 MagSafe Mount - No more clamps!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DJI Osmo Mobile 6 - MagSafe Magnetic Adapter (Clamp Replacement)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
Why use this?
No more clamps: Quickly attach or detach your phone without fighting the spring-loaded DJI grip.
Perfect Balance: Designed to keep the center of gravity optimal for the DJI Osmo 6 motors.
Slim Profile: Stays on the gimbal or phone without the bulk of the original hardware.
Hardware Requirements:
To ensure a strong and secure hold (essential for gimbal movement), you will need:
3x Neodymium Magnets: 10mm x 2.2mm (to interface with the DJI base).
1x MagSafe Magnetic Ring: (Link provided in the BOM/Description).
Superglue: A few drops to secure the magnets in place.
Files Included:
Pre-configured Print Profile: Optimized for PLA (can also be printed in PETG for outdoor durability).
Source File (.f3d): I have included the Fusion 360 file so you can tweak the tolerances or modify it for different magnet sizes if needed.
Print Settings:
Filament: PLA (tested) or PETG.
Walls: 3-4 walls for structural integrity.
Infill: 20% (Gyroid).
Supports: Minimal/None depending on orientation (check the 3MF file).
Assembly Tip:
Before gluing, double-check the polarity of the magnets against your DJI Osmo 6 base and your MagSafe phone/case. You want a strong snap-on effect, not a repulsion!